Jeep RENEGADE 2017, Руководство пользователя

Страница: 34 / 332

EXTERIOR LIGHTS
Headlights
The headlight switch is located on the left
side of the instrument panel. The headlight
switch controls the operation of the head-
lights, side marker lights, daytime running
lights, fog lights and the dimming of the
instrument cluster and interior lighting.
Turning on the headlights will illuminate the
instrument cluster and the controls located
on the instrument panel.
Daytime Running Lights (DRL) — If
Equipped
The Daytime Running Lights (DRLs) will turn
on when the engine is started and remain on
unless the headlights are turned on or the
engine is shut off.
The DRLs will be disabled during turn signal
operation and resume operation when the
turn signal operation has ended.
High Beams
To turn on the high beam headlights, push
the turn signal lever forward (toward the front
of the vehicle) and an indicator will illumi-
nate in the cluster. To turn off the high
beams, pull the turn signal lever rearward
(toward the rear of the vehicle).
NOTE:
The headlights must be on for the high beams
to activate.
Flash-To-Pass
You can signal another vehicle with your
headlights by lightly pulling the multifunc-
tion lever toward you. This will cause the
headlights to turn on at high beam and re-
main on until the lever is released.
Headlight Switch
High Beam And Turn Signal Controls
GETTING
TO
KNOW
YOUR
VEHICLE
32