Jeep Grand Cherokee, Краткое руководство по ремонту

Страница: 11 / 18

Jeep New Cherokee
Emergency procedures
WARNING
Do not connect the cable to the negative terminal (-) of the flat
battery. The following spark could lead to battery explosion and
cause serious harm. Only use the specific earth point; do not use
any other exposed metallic part.
- Start the engine of the car with an auxiliary battery, let it run for
some minutes at idle and then start the engine of the car with
flat battery.
Once the engine is started, remove the cables used as a jumper
in the reverse sequence:
- Disconnect the end of the cable used for negative (-) from the
earth point (-) of the car with flat battery.
- Disconnect the other end of the cable used for negative
(-) from the negative terminal (-) of the auxiliary battery.
- Disconnect the end of the cable used for positive (+) to the
positive terminal (+) of the auxiliary battery.
- Disconnect one end of the cable used for positive (+) from the
positive pole (+) of the vehicle with flat battery.
- Refit the protective cover over the battery positive pole (+).