Jeep Grand Cherokee SRT 2014, Руководство пользователя

Страница: 38 / 172

• Press the AUTO button or AUTO soft-key.
• Select the desired temperature by pushing the up or down temperature buttons for
the driver or passenger.
• The system will maintain the set temperature automatically.
Air Conditioning (A/C)
• If the air conditioning button is pressed while in AUTO mode, the system will exit
AUTO mode and stay in A/C. The mode and blower will be set at the closest mode
and blower position that the system was operating in AUTO.
MAX A/C
• MAX A/C sets the control for maximum cooling performance.
• Touch and release to toggle between MAX A/C and the prior settings. The soft-key
illuminates when MAX A/C is ON.
• In MAX A/C, the blower level and mode position can be adjusted to desired user
settings. Pressing other settings will cause the MAX A/C operation to switch to the
prior settings and the MAX A/C indicator will turn off.
SYNC Temperature Soft-Key
• Touch the SYNC soft-key on the Uconnect ® Access radio to control the driver and
passenger temperatures simultaneously. Touch the SYNC soft-key a second time to
control the temperatures individually.
Air Recirculation
• Use recirculation for maximum A/C operation.
• For window defogging, turn the recirculation button off.
• If the recirculation button is pushed while in the AUTO mode, the indicator light
may flash three times to indicate the cabin air is being controlled automatically.
Heated Mirrors
• The mirrors are heated to melt frost or ice. This feature is activated whenever you
turn on the rear window defroster.
PARKSENSE® REAR PARK ASSIST
• ParkSense ® can be enabled and disabled by pressing the ParkSense ® switch
located below the climate controls, on the switch panel.
• The four ParkSense ® sensors, located in the rear fascia/bumper, monitor the area
behind the vehicle that is within the sensors’ field of view. The sensors can detect
obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear
fascia/bumper in the horizontal direction, depending on the location, type and
orientation of the obstacle.
• The six ParkSense ® sensors, located in the front fascia/bumper, monitor the area
in front of the vehicle that is within the sensors’ field of view. The sensors can
detect obstacles from approximately 12 in (30 cm) up to 47 in (120 cm) from the
front fascia/bumper in the horizontal direction, depending on the location, type
and orientation of the obstacle.
OPERATING YOUR VEHICLE
36