Jeep GLADIATOR 2023 страница 88 Скачать руководство пользователя

Страница: 88 / 420

GETTING TO KNOW YOUR VEHICLE

EMOVING

OFT

Use this QR code to access your digital

experience.
1. Fully lower the soft top to the

Sunrider® position

page 77.

2. Using the provided #T50 Torx head driver and

ratchet, unscrew the two Torx head fasteners on the

inside of each top mechanism.

Step Two

3. Utilizing two people, lift the soft top up and away from

the vehicle, careful to avoid the vehicle’s sport bar

and trim. Store the soft top in a safe, clean, and dry

location.

4. Remove the door frames. The rear door frames must

be removed before the front door frames

page 96.

5. Using the provided #T50 Torx head driver and

ratchet, unscrew the six Torx head fasteners on both

rear corners and the back of the cab, then remove the

belt rail.

NOTE:

Folding down the rear seats is recommended to provide

easier access to the fasteners.

Step Five

NSTALLING

OFT

NOTE:

If installing the soft top immediately after removing the

hard top, ensure the wire harness is stored properly, and

not tucked under the belt rail

page 91.

1. Install the belt rail on the rear of the vehicle. Secure

the belt rail using the six fasteners with the provided

#T50 Torx head driver and ratchet. Refer to the

following table for recommended torque specifi

cations.

CAUTION!

Failure to follow the next steps could result in damage

to the soft top or vehicle.

1 — Corner Fasteners
2 — Rear Fasteners

Torque

Specification For

Torx Fastener

Maximum

Minimum

119.5 in-lb

(13.5 N·m)

150.5 in-lb

(17.0 N·m)

106.2 in-lb

(12.0 N·m)

CAUTION!

Do not overtighten Torx fasteners. Damage to the

retainers will occur.

23_JT_OM_EN_USC_t.book Page 86

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды