Jeep GLADIATOR 2023 страница 93 Скачать руководство пользователя

Страница: 93 / 420

GETTING TO KNOW YOUR VEHICLE

4. Unfold the outer flap and zip the hard top bag closed.

Step Four

5. Store the Freedom Top panels bag in a safe location.

ARD

RONT

ANEL

(

)

NSTALLATION

1. Set the right side panel on the windshield frame with

the locating pin in the front receiver mounting hole,

followed by the left side panel, making sure there is

no overhang. Make sure that the panels are sitting

flush with the body.

2. Secure the panel(s) using the same steps for removal

in reverse order.

NOTE:

To prevent water leaks, the seals and hard top panels

should be clear of any dust and debris prior to

reinstallation.

EMOVING

ARD

Use this QR code to access your digital

experience.
1. Remove both front panels

page 88.

2. Open both front doors.
3. Using the provided #50 Torx head

driver and ratchet, remove the

two Torx head screws that secure the hard top at

the B-pillar (near the top of the front doors).

Step Three

4. If equipped, remove the lower interior soft trim panel

(attached by the hook-and-loop fastener) by pulling

the panel away from the trim.

Step Four

5. Remove the Torx head fasteners that secure the hard

top to the vehicle: two along the interior body side,

rearward of the back doors, followed by the four

fasteners along the back of the vehicle cab using the

#T50 Torx head driver.

Step Five

1 — Vehicle Cab Torx Head Fasteners
2 — Body side Torx Head Fasteners

23_JT_OM_EN_USC_t.book Page 91

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды