Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 133 / 420

GETTING TO KNOW YOUR INSTRUMENT PANEL

131

Rear Seat Unoccupied Indicator Light —

If Equipped

This light indicates when the rear passenger

seats are unoccupied, and will illuminate in the

upper right portion of the instrument cluster

display, momentarily replacing the

configurable corner information.

Cruise Control Ready Indicator Light —

If Equipped With A Premium Instrument

Cluster

This light will turn on when the cruise control

has been turned on, but not set.

Cruise Control SET Indicator Light —

If Equipped With A Base Instrument

Cluster

This indicator light will illuminate when the

cruise control is set.

Cruise Control Ready Indicator Light —

If Equipped With A Base Instrument

Cluster

This light will turn on when cruise control has

been turned on, but not set.

Selec Speed Control (SSC) Indicator

Light — If Equipped

This light will turn on when Selec Speed Control

is activated. Selec Speed Control is available in

4WD Low ONLY.

LUE

NDICATOR

IGHTS

High Beam Indicator Light

This indicator light will illuminate to indicate

that the high beam headlights are on. With the

low beams activated, push the multifunction

lever forward (toward the front of the vehicle) to

turn on the high beams. Pull the multifunction lever

rearward (toward the rear of the vehicle) to turn off the

high beams. If the high beams are off, pull the lever toward

you for a temporary high beam on, "flash to pass"

scenario.

ONBOARD DIAGNOSTIC SYSTEM — OBD II

Your vehicle is equipped with a sophisticated Onboard

Diagnostic system called OBD II. This system monitors the

performance of the emissions, engine, and transmission

control systems. When these systems are operating

properly, your vehicle will provide excellent performance

and fuel economy, as well as engine emissions well within

current government regulations.
If any of these systems require service, the OBD II system

will turn on the Malfunction Indicator Light (MIL). It will

also store diagnostic codes and other information to

assist your service technician in making repairs. Although

your vehicle will usually be drivable and not need towing,

see an authorized dealer for service as soon as possible.

CAUTION!



Prolonged driving with the MIL on could cause further

damage to the emission control system. It could also

affect fuel economy and driveability. The vehicle

must be serviced before any emissions tests can be

performed.



If the MIL is flashing while the vehicle is running,

severe catalytic converter damage and power loss

will soon occur. Immediate service is required.

23_JT_OM_EN_USC_t.book Page 131

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды