22 GETTING TO KNOW YOUR VEHICLE
IGNITION SWITCH
Keyless Enter-N-Go — Ignition
This feature allows the driver to operate the ignition with the
push of a button as long as the key fob is in the passenger
compartment.
The START/STOP push button ignition has three operating
modes. The three modes are OFF, ON/RUN, and START.
NOTE:
If the ignition state/mode does not change with the push of
a button, the key fob may have a low or depleted battery. In
this situation, a back up method can be used to operate the
ignition switch. Put the nose side (side opposite of the emer
-
gency key) of the key fob against the START/STOP ignition
button and push to operate the ignition.
START/STOP Ignition Button
The push button ignition can be placed in the following modes:
OFF
• The engine is stopped.
• Some electrical devices (e.g. Central locking, alarm, etc.)
are still available.
2020_JEEP_MP_OM_USA=GUID-E8C7E66B-DF9E-40BA-9B4A-03D9C7E22684=1=en=.backup.book Page 22