Jeep Compass 2019, Руководство пользователя

Страница: 56 / 284

• Up Arrow Button
Push and release the up arrow button to
scroll upward through the main menu and
submenus.
• Down Arrow Button
Push and release the down arrow button to
scroll downward through the main menu
and submenus.
• Right Arrow Button
Push and release the right arrow button to
access the information screens or submenu
screens of a main menu item.
• Left Arrow Button
Push and release the left arrow button to
access the information screens or submenu
screens of a main menu item.
• OK Button
Push the OK button to access/select the
information screens or submenu screens of
a main menu item. Push and hold the
OK
button for one second to reset displayed/
selected features that can be reset.
Oil Change Reset
• Your vehicle is equipped with an engine oil
change indicator system. The “Oil Change
Due” message will display in the instru-
ment cluster display for five seconds after a
single chime has sounded, to indicate the
next scheduled oil change interval. The
engine oil change indicator system is duty
cycle based, which means the engine oil
change interval may fluctuate, dependent
upon your personal driving style.
• Unless reset, this message will continue to
display each time the ignition is cycled to
the ON/RUN position.
To reset the oil change indicator after per-
forming the scheduled maintenance, refer to
the following procedure:
1. Without pressing the brake pedal, push
the ENGINE START/STOP button and
cycle the ignition to the ON/RUN position
(do not start the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Cycle the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
Instrument Cluster Display Menu Items
NOTE:
The instrument cluster display menu items
display in the center of the instrument clus-
ter. Menu items may vary depending on your
vehicle features.
TRIP COMPUTER
Push and release the up or down arrow button
until the Trip A or Trip B icon is highlighted in
the instrument cluster display (Toggle left or
right to select Trip A or Trip B). Push and
release the OK button to display the Trip
information.
GETTING
TO
KNOW
YOUR
INSTRUMENT
P
ANEL
54