Jeep compass 2017, Руководство пользователя

Страница: 389 / 429

Reset
To Reset all settings using Voice Command:
1. Push the Phone button.
2. After the “Ready” prompt and the following beep, say
“Setup,” then “Reset.”
•
This will delete all phone pairing, phone book entries,
and other settings in all language modes. The System
will prompt you before resetting to factory settings.
Voice Command
For best performance:
•
Adjust the rearview mirror to provide at least ½ inch
(1 cm) gap between the overhead console (if equipped)
and the mirror.
•
Always wait for the beep before speaking.
•
Speak normally without pausing, just as you would
speak to a person sitting a few feet/meters away from
you.
•
Make sure that no one other than you is speaking during
a Voice Command period.
Performance is maximized under:
•
Low-to-medium blower setting
•
Low-to-medium vehicle speed
•
Low road noise
•
Smooth road surface
•
Fully closed windows
•
Dry weather condition
NOTE:
•
Even though the system is designed for users speaking
in North American English, French, and Spanish accents,
the system may not always work for some.
•
When navigating through an automated system such as
voice mail, or when sending a page, at the end of
speaking the digit string, make sure to say “Send.”
•
Storing names in the phonebook when the vehicle is not
in motion is recommended.
10
MULTIMEDIA 387