Parkview Rear Back-Up Camera
You can see an on-screen image of the rear
of your vehicle whenever the transmission is
shifted into REVERSE. The ParkView Rear
Back-Up Camera image will be displayed on the
Uconnect Display, located on the center stack
of the instrument panel.
For further information, and applicable warnings
and cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).
Memory Seats — If Equipped
This feature allows the driver to store up to two
different memory profiles for easy recall
through a memory switch. Your vehicle is
equipped with two key fobs, one key fob can be
linked to memory position 1 and the other can
be linked to memory position 2, can also be
programmed to recall the same positions when
the unlock button is pushed.
NOTE:
Before programming your key fob you must
select the “Linking And Unlinking The Remote
Keyless Entry Key Fob To Memory” feature
through the Uconnect system.
To Create A New Memory Profile
1. Cycle the vehicles ignition to the OFF position.
2. Select the desired memory profile 1 or 2.
3. Push and release the S (Set) button on the
memory switch.
4. Within five seconds, push and release either
of the memory buttons (1) or (2). The instru-
ment cluster display will show which memory
position has been set.
NOTE:
Memory profiles can be set without the vehicle
in PARK, but the vehicle must be in PARK to
recall a memory profile.
For further information, and applicable warnings
and cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).
Memory Seat Buttons
SEATS
