NOTE:
If desired, the Adaptive Cruise Control mode
can be turned off and the system can be oper-
ated as a normal (Fixed Speed) Cruise Control
mode. When in the normal (Fixed Speed) Speed
Control mode the distance setting feature will
be disabled and the system will maintain the
speed you set.
• To change between the different cruise con-
trol modes, push the ADAPTIVE CRUISE
CONTROL (ACC) On/Off button which turns
the ACC and the normal (Fixed Speed)
Cruise Control off.
• Pushing the normal (Fixed Speed) Cruise
Control On/Off button will result in turning
on (changing to) the normal (Fixed Speed)
Cruise Control mode.
For further information, and applicable warnings
and cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).
Forward Collision Warning
(FCW) — If Equipped
The Forward Collision Warning (FCW) system
with mitigation provides the driver with audible
warnings, visual warnings (within the instru-
ment cluster display), and may apply a brake
jerk to warn the driver when it detects a poten-
tial frontal collision. The warnings and limited
braking are intended to provide the driver with
enough time to react, avoid or mitigate the
potential collision.
The FCW Sensitivity and Active Braking status
are programmable through the Uconnect Sys-
tem and has three settings:
• Medium
• Far
• Near
For further information, and applicable warnings
and cautions, please refer to the Owner’s Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Cana-
dian Residents).
LaneSense — If Equipped
The LaneSense system is operational at speeds
above 37 mph (60 km/h) and below 112 mph
(180 km/h). The LaneSense system uses a
forward looking camera to detect lane markings
and measure vehicle position within the lane
boundaries.
Turning LaneSense On Or Off
The default status of LaneSense is “off”. The
LaneSense button is located on the center stack.
LaneSense Warning Message
The LaneSense system will indicate the current
lane drift condition through the instrument
cluster display. The instrument cluster display
will provide a visual warning depicting the un-
intentional lane departure.
When both lane markings are detected and the
driver unintentionally drifts out of the lane (no
turn signal applied), the LaneSense system
provides a haptic warning in the form of torque
applied to the steering wheel to prompt the
driver to remain within the lane boundaries.
SAFETY FEATURES
