Jedmed J-II, Руководство по эксплуатации и обслуживанию, Страница: 26 / 30

SYNCHRONIZED FOOTREST
WITH MOTORIZED LIFT BASE
SYNCHRONIZED FOOTREST
WITH MANUAL LIFT BASE
13
12
11
3
2
4
21
20
19
18
7
8
23
9
10
1
6
ASSEMBLY INSTRUCTIONS
1. MARK AND DRILL THE LIFT BASE MOUNTING HOLES USING A 3/8" DRILL AND TEMPLATE 502-T001 (MANUAL BASE)
OR 502-T002 (MOTORIZED BASE). NOTE, LOCATE PUMP ARM OR PEDALS ON THE RIGHTHAND SIDE OF CHAIR
(WHEN SEATED) 90 DEGREES FROM THE SINGLE REAR MOUNTING HOLE. ROTATE RUBBER EDGING ON THE
MOTORIZED BASE SO POWER CORD COMES OUT IN BACK; HOWEVER, OFFSET IT BY 5 DEGREES SO THE
MOUNTING HOLE IS NOT BLOCKED.
2. ATTACH MOUNTING PLATE TO LIFT BASE (USE CENTER BOLT FOR MOTORIZED BASE)
3. BOLT CHAIR FRAME TO MOUNTING PLATE (BEFORE ASSEMBLING MOUNTING PLATE USE A 5/8" COUNTERBORE
AND REMOVE PAINT ON CHAIR FRAME AT FRONT TWO HOLES (FOR GROUNDING BENEATH BOLT HEAD) FOR MOTORIZED BASE)
4. MAKE AND INSTALL GROUND WIRES (SEE PAGE 2)
5. INSTALL BACKREST LINKAGE (USE BLUE (REMOVABLE) LOCTITE ON LINKAGE SCREW)
6. INSTALL FOOTREST FRAME (USE BLUE (REMOVABLE) LOCTITE ON FRAME BOLTS)
7. INSTALL LINKAGE ROD
8. LAY CHAIR BACK SLIGHTLY AND SET FOOTREST BAR STOP INTO PLACE
9. INSTALL SEAT CUSHION AND GAS SPRING RELEASE PLATE
10. INSTALL BACKREST CUSHION
11. INSTALL LEGREST CUSHION
12. INSTALL LIGHT (OPTIONAL)
13. INSTALL BACKREST PLASTIC SHROUD
14. INSTALL HEADREST
15. INSTALL LEVER GRIPS
16. TEST/ADJUST GAS-SPRING AS NECESSARY
17. INSTALL ALL LABELS
9
5
24
27
29
22
14
16
15
17
MANUAL LIFT BASE
27
24
22
LABEL LOCATIONS (TYP.)
BOTTOM VIEW (CROPPED) WITH BASE REMOVED
25
28
26
29
FOOTREST FRAME BOLTS
(4 PLACES)
BACKREST
LINKAGE
SCREW
REAR VIEW (CROPPED) WITH PLASTIC COVER REMOVED
29
30 1 1 -- PMNL084 INSTRUCTION MANUAL
29 AR AR K601002 -- THREADLOCK: RED #271 (PERMANENT) OR EQUIVALENT
28 1 - -- 184A-AW003 LABEL: "TO REMOVE CHAIR FROM BASE....."
27 1 1 K701005 LAB 111 LABEL: "THIS BASE SHOULD BE SECURELY...."
26 1 1 -- 502-AW001 LABEL: SERIAL NUMBER (ALL VERSIONS)
25 1 1 -- LAB 113 LABEL: "UNDER PENALTY OF LAW...."
24 1 1 -- LAB 019 LABEL: "JEDMED"
23 2 2 KA04010 -- LEVER GRIP
22 3 3 KA01006 -- HOLE PLUG: 0.375", NICKEL PLATED STEEL
21 4 4 K119027 -- LOCKNUT: M8 (1.25MM/THD), HX, NYLOK INSERT, Z
20 1 - K120032 -- FW: M10, 10.5MM ID, 30.0MM OD, ZINC
19 1 - K120033 -- LW: M10, SR, SS
18 1 - K117028 -- MS: M10 X 20MM (1.5MM/THD), HX HD, BO
17 - 1 K300466 502-006 MOUNTING PLATE: 0°, F/ MANUAL BASE
16 1 - K300465 502-005 MOUNTING PLATE: 0°, F/ MOTORIZED BASE
15 - 1 04-1330 -- LIFT BASE: MANUAL
14 1 - 04-1332 -- LIFT BASE: ELECTRIC, 115V
13 4 4 K117038 -- MS: M4 X 16MM, OVAL HD, PH, SS
12 1 1 KA08018 502-004 HEADREST CUSHION F/ S-II, J-II & L (SPECIFY COLOR)
11 1 1 K905004 -- HEADREST BRACKET
10 4 4 K117037 -- CS: M8 X 25MM, HX HD, BLUE
9 8 8 K117031 -- CS: M8 X 20.0MM, SERRATED FLANGE, HX, Z
8 2 2 K117034 -- CS: M8 X 40.0MM, SERRATED FLANGE, HX, Z
7 4 4 K117033 -- CS: M8 X 35.0MM, SERRATED FLANGE, HX, Z
6 1 1 KA08017 502-003 LEGREST CUSHION F/ SII, JII & L (SPECIFY COLOR)
5 1 1 K120041 -- FW: 0.437" ID, 0.750" OD, 0.0625" THICK, N/N
4 1 1 K905018 -- METAL FRAMEWORK F/ FOOTREST
3 1 1 KA08016 502-002 BACKREST CUSHION F/ S-II, J-II & L (SPECIFY COLOR)
2 1 1 KA08015 502-001 SEAT CUSHION F/ S-II, J-II & L (SPECIFY COLOR)
1 1 1 K905017 -- METAL FRAMEWORK TOP COMPLETE
ORDER QTY. ITEM NO.
04-1545
ELECTRIC
115V
04-1540
MANUAL
LOT NO. PART NO. DWG. NO. DESCRIPTION
BILL OF MATERIALS
QUALITY NOTICE --CONFIDENTIAL & PROPRIETARY--
DO NOT SCALE
THIS DESIGN IS THE PROPERTY OF JEDMED INSTRUMENT CO.;
ANY UNAUTHORIZED REPRODUCTION OR USE IS STRICTLY
PROHIBITED.
ALL MATERIAL AND WORKMANSHIP TO BE SUITABLE
FOR MEDICAL ENVIRONMENTS, APPLICATIONS, AND/
OR EQUIPMENT WHICH MAY BE USED IN SURGERY.
MULTIPLE PART #
5416 JEDMED COURT
ST. LOUIS, MO 63129-2221
(314) 845-3770 FAX [314] 845-3771
INSTRUMENT COMPANY
11 X 17 (B)
M. GODFREY
MATERIAL
FINISH
DRAWN BY
APPROVED BY
DATE
DATE
SHEET SIZE
TITLE
DRAWING #
DIMENSIONS
[mm] in
SHEET_______OF_______
REV
06-14-2005
--
--
ASS'Y: S-II CHAIR
(ALL VERSIONS)
502-AY001
1 2
DATE REV ECO#/DESCRIPTION DR AP
0
RELEASE STAMP
S-II CHAIR