27
10 - GEAR BOX
Makes - Comer: 5 litres SAE 90 EP oil. Change yearly.
- GB: 6.65 litres SAE 90 EP oil. Change yearly.
11 - HYDRAULIC HOSES
1.
See page 17 Section: Maintenance and repair.
2.
Once a week check the condition of the hydraulic hoses, especially sections in contact
with the equipment.
3.
Once a week check for leaks from the hydraulic connectors.
4.
Retighten the hydraulic connectors if required after the first few hours of operation.
10. Start up and Operation
1.
Our straw blowers will give reliable and satisfactory service if used within their normal
limits.
2.
Never exceed the stated maximum load.
3.
Before loading the straw blower when first used and every time after a period of
inactivity, operate the feed conveyor for one complete revolution.
1. LOADING
Ensure that under no circumstances during operation does anyone enter the potential danger
areas around the blower unit.
I) Round straw bales
A) With door only without extension.
1.
Fully lower the unit onto the ground.
2.
Open the door fully.
3.
Stop the tractor engine.
4.
Load the bale using a front loader or other suitable device by gently placing the
bale on the door with the free end feeding into the hopper (see diagram).