Jeanneau sun odyssey 54 DS, Руководство пользователя, Страница: 87 / 115

44
58
8
Index 1
The electrical switchboard does not require any routine maintenance.
In case an electrical unit should not be energized, check:
- The main power supply (batteries, master switches),
- The switches and fuses along the line,
- The relevant electrical unit.
Use the automatic reset switch to read the fuel gauge, to avoid electrolytic problems.
As far as possible, use electrical appliances with a double insulation or three conductors
(Neutral - Phase - Earth).
Connect the casings or metallic cases of the fitted electrical appliances to ship’s ground:
this conductor is green with yellow stripes
W
W
A R N I N G
A R N I N G
Never work on a live electrical fitting.
P R E C A U T I O N
P R E C A U T I O N
Never leave the boat unattended when the elctrical fittings are on, except forsecurity
devices directly connected to batterie and protected by a circuit breaker.
Disconnect the shore power before opening the electrical switchboard.
P R E C A U T I O N
P R E C A U T I O N
Only a technician, skilled in marine electricity, is entitled to alter a fixture and
the relevant diagrams.
Never change or alter the amperage of the overcurrent safety devices.
Never install or replace the electrical appliances or equipment with components
exceeding the circuit design amperage.(Watt for bulbs)
OPERATION
230V (or 115 V) CIRCUIT
wiring