Jeanneau SUN ODYSSEY 44 DS Скачать руководство пользователя страница 44

Страница: 44 / 154

40/150

136407

Index D

NAVIGATION - DECK LAYOUT

- A. Mooring cleats

• Jacklines (fastened to mooring cleats) - not supplied

- B. Towing:

• at the bow, to be towed
• at the stern, to tow

- C. Swimming ladder (means of coming back onboard)

DANGER

- Wear your life jacket.
- In heavy weather, wear your safety harness and fasten yourself to the boat.
- When at sea close the guardrail side-opening or openings.
- Do not try to stop the boat using a boat hook or your foot, your hand or any

other part of the body.

WARNING

The sudden closing of a locker due to a gust of wind or movement of the boat
could result in injury.

ADVICE - RECOMMENDATION

Close the deck hatches and portholes before each trip (including the companionway hatch
in heavy weather).

Содержание SUN ODYSSEY 44 DS



























































































































































Результаты поиска

Содержание SUN ODYSSEY 44 DS

Отзывы:

Jeanneau SUN ODYSSEY 44 DS, Руководство пользователя, Страница: 44 / 154

Результаты поиска

Содержание SUN ODYSSEY 44 DS

Отзывы: