Jeanneau SUN ODYSSEY 44 DS Скачать руководство пользователя страница 139

Страница: 139 / 154

135/150

136407
Index D

Turn the joystick anti-clockwise.

The boat turns to port (virtually pivoting around its keel). Forward or
reverse acceleration is proportional to the position of the joystick.

Turn the joystick clockwise.

The boat turns to starboard (virtually pivoting around its keel).
Forward or reverse acceleration is proportional to the position of the
joystick.

Push the joystick fo turn clockwise.

The boat moves forward and turns to starboard.

The acceleration is proportional to the position of the joystick.

Do the same manoeuvre turning anti-clockwise.

The boat moves forwards and turns to port.

.The acceleration is proportional to the position of the joystick.

Push the joystick back + turn clockwise

The boat moves backwards and turns to port.

The acceleration is proportional to the position of the joystick.

Do the same manoeuvre turning anti-clockwise.

The boat moves backwards and turns to starboard.

The acceleration is proportional to the position of the joystick.

Содержание SUN ODYSSEY 44 DS



























































































































































Результаты поиска

Содержание SUN ODYSSEY 44 DS

Отзывы:

Jeanneau SUN ODYSSEY 44 DS, Руководство пользователя, Страница: 139 / 154

Результаты поиска

Содержание SUN ODYSSEY 44 DS

Отзывы: