Jeanneau MERRY FISHER 705, Руководство пользователя, Страница: 67 / 90

63/86
ELECTRICAL CIRCUIT, 110-230 V
General recommendations
Certain vessels are equipped (as either standard or optional features depending on
the model)with a 110 V or 230 V circuit.
The following measures are recommended in order to avoid the danger of electrical shock
and fire:
- Never work on a live electric fitting.
- Plug in the boat/shore supply cable in the boat before you plug it into the shore supply
socket.
- Never let the end of the boat/shore supply cable hang in the water.
- When the shore supply is connected there may be a difference between the "earth" of
the vessel and that of the mains supply, this could create a danger of a counter balance
current and therefore electrocution (particularly for any swimmers in the vicinity).
Take the necessary precautions.
- Turn off the shore supply with the onboard cut-off switch before connecting or
disconnecting the vessel/shore supply line.
- Disconnect the ship/shore power cable at the shore socket first.
- Check the polarity indicator for the shore connections (110V AC version).
- If the reverse polarity indicator is activated immediately disconnect the cable. Rectify
the polarity fault before using the vessel's electrical installation.
- Close the shore supply input cover firmly after use.
- Do not modify the vessel/shore supply line connections; only use compatible
connections.
- Do not alter the vessel's electrical system. The installation, modifications and
maintenance must be carried out by a qualified marine electricity technician. Check the
system at least twice a year.
- Disconnect the vessel supply when the system is not being used. This is to prevent the
danger of fire.
- Use double insulated or earthed appliances.
Note that the live wires are brown, the neutral ones are blue and the earth wires are green
and yellow.
DANGER
- Never let the end of the boat/shore supply cable hang in the water: The
result may be an electric field liable to hurt or kill the swimmers nearby.
- There may be danger of electrocution if alternating current systems are
incorrectly used.
9
E
L
E
C
T
R
IC
A
L
E
Q
U
IP
M
E
N
T