Jeanneau MERRY FISHER 705, Руководство пользователя, Страница: 27 / 90

23/86
BILGE PUMP SYSTEM
PROCEDURE TO BE FOLLOWED
- Switch on the electric bilge pump.
- If necessary activate the manual pump.
- Identify the source of the leak by tasting the water and decide on the relevant action to
be taken (freshwater = water tank leak, seawater = breach of hull).
ELECTRIC BILGE PUMP
The electric bilge pump is located on the water pump unit under the galley seating.
You can energize the electric bilge pump from the electrical panel.
Operation:
The electric bilge pumps are connected to the 12V service circuit. To enable operation the
12V circuit must be activated by turning on the battery switches.
Capacity: 15 litre / minute.
OPERATION - ELECTRIC BILGE PUMP
Location Control
2
S
A
F
E
T
Y