Jeanneau LEADER 805, Руководство пользователя

Страница: 87 / 90

83/86
LAYING UP
- Take ashore all the ship's log, the ropes that are not used for mooring, the galley equipment,
supplies, clothes, the safety equipment, batteries, the gas cylinder.
- Mark again the safety equipment, check the expiration dates, have the liferaft overhauled.
- Take advantage of this laying up to draw up a complete inventory of the equipment.
PROTECTION AND MAINTENANCE
INSIDE
- Drain all the fresh water pipes and rinse them with water and vinegar (do not use a chlorine based
product).
- Lubricate and close all the water inlet valves and thru-hull fittings. Rinse and completely drain the
heads bowls and pumps.
- Retract the sounder and speedometer sensors.
- Seal air inlets as much as you can.
- Leave the cushions outside for long before putting them back into the boat in the upright and side
position in order to have minimum contact surfaces.
OUTSIDE
- Thoroughly rinse the hull and deck.
- Grease all moving and mechanical parts (latches, hinges, locks, etc).
- Protect all ropes and mooring lines against chafing.
- Protect the boat to the highest degree with fenders.
- Make sure the boat is properly moored.
All these recommendations do not make up an exhaustive list. Your dealer will give you the advice you
need and will carry out the technical maintenance of your boat.
ENGINE
The engine winterization shall be carried out by a professional. Depending on the boat location, afloat
or ashore, winterization is different.
Please refe to the engine manual for anything relating to the engine.
10
WINTER STORAGE