Jeanneau LEADER 805, Руководство пользователя

Страница: 36 / 90

32/86
ANCHORING
As a rule, set the anchor in at least 3 times the depth of water.
- Have your boat pointed into the wind and without speed.
- Pay out the chain while moving back slowly.
- Secure the cablet on the mooring cleat.
HEAVING UP THE ANCHOR
- Lock the cable lifter snubber.
- Ensure the chain is properly set on the cable lifter.
- Slowly go near the anchor, using your engine (Don't use your windlass to winch the boat).
- Heave the anchor completely.
- Visually check the last meters till the anchor gets into contact with the davit.
- If you just change berth, check the position of the anchor on the stem fitting
- With an electric windlass, switch the power off as soon as the chain is fast.
STERN ANCHORING
Stern anchoring shall be performed with the engine declutched.
- Secure the required length of cablet on the mooring cleat.
- Pay out the anchor line slowly.
- Take care you don't damage the propeller or rudder
PRECAUTION
Before anchoring check the depth of water, the power of the current and the nature of the sea bed.
PRECAUTION
Keep the engine running during the anchoring operations to avoid discharging the batteries.