Jeanneau Leader 40 Скачать руководство пользователя страница 37

Страница: 37 / 100

- 37 -

Bilge pump maintenance

Please refer to the manufacturer's notes on the instructions for checking and maintaining the
bilge pumps.

- The bilge pumps system is not designed to deal with water coming in
through breaches in the hull.

- Keep the water level in the bilges to the minimum.

- Never store anything right at the bottom of the boat: Allow bilge water to flow
freely down to the lowest point of the boat.

SAFETY PRECAUTIONS

- Check that each bilge pump is working at regular intervals.

- Clear the bilge pump points or strainers of any debris that could clog them.

- If the watertight partitions which seal off the fore and aft points are fitted with valves they
must be closed at all times and only opened to drain water into the main bilge.

Содержание Leader 40





































































































Результаты поиска

Содержание Leader 40

Отзывы:

Похожие инструкции для Leader 40

Бренды по названию

Популярные бренды

Jeanneau Leader 40, Руководство пользователя

Результаты поиска

Содержание Leader 40

Отзывы:

Похожие инструкции для Leader 40

Бренды по названию

Популярные бренды