Jeanneau 54 2017, Инструкция по эксплуатации и информации

Страница: 29 / 46

Remove the safety line or safety pin, and push the anchor over the bow, keeping hands and feet
clear. Control the rate the chain pays out by tightening or loosening the wing nut with the
stainless handle.
When you have paid out enough chain, between 5 to 8 times the water depth, push the handle
forward to tighten the wing nut. Next, fit the bridle and release more chain on the gypsy so that
the load is taken up on the snubbing line.
To raise the anchor, put the handle in the outer hole and turn the whole drum clockwise, this will
wind in the chain. However, it is quicker if you pull the anchor up by hand as the helmsperson
motors forward a little at a time, to give you slack on the chain. If you are reasonably fit and
strong, it is possible to heave an anchor aboard.
Windlass Breaker
The windlass breaker is behind the starboard aft cabin door below the generator
battery switches and next to the electric winch breakers.
Windlass breaker