background image

OPERATING INSTRUCTIONS

 

1.    Plug power cord into 120 volt wall receptacle.

2.    Firmly grasp massager handgrips with both hands 

    from above with thumbs toward center of unit.

3.    Using right hand, turn rotary power switch clockwise 

    to begin operation.

4.    Turn rotary power switch to adjust speed to a medium   

 

    operating mode.

5.    Place massager in contact with body.

    •  Allow massager to do the work. It is not necessary 

      to press or bear down on massager to achieve results.

    •  Find a speed that is most comfortable to the individual. 

      Use lower speeds to ensure a more soothing massage.  

 

      Use higher speeds to deliver a more invigorating 

   massage.

    •  Therapeutic benefits can be achieved in as little as 

      5-10 minutes per area, but may vary by individual.

 

  •  For direct contact on skin, Core Products recommends  

 

 

    using any of the Jeanie Rub covers to protect the vinyl  

 

 

    pad of your massager. Using covers also allows the 

 

    use of oils, lotions or creams. Using these products    

 

 

    without a cover can prematurely crack and erode the  

 

 

    vinyl pad. (See pages 9 -10 for covers.)

6.    Using right hand, turn rotary power switch counter- 

 

 

    clockwise to stop operation.

5

Note:

  

Your Jeanie Rub Massager runs up to a design specification 

of 4600 RPMs. If you are accustomed to older Jeanie Rub models, this 

faster speed may seem rough. Please be assured this is completely 

normal as each unit is individually tested to meet our standards. 

CARE AND MAINTENANCE

 

To keep your massager working and looking its best, follow these 

simple steps.

1.    Unplug your massager from receptacle before cleaning.

2.    Wipe the vinyl pad of the massager with a damp 

    cloth and mild detergent to clean. Do not use products 

    containing alcohol, as this may cause the vinyl to 

    prematurely crack and erode.

3.    When cleaning around power switch or air openings, 

    use a dry cloth only. Never use a damp cloth to clean    

 

    these areas.

4.    This product is maintenance free. No periodic lubrication 

    or servicing is required.

5.    Allow adequate time for massager to cool down 

    before storing.

6.    When your massager is not in use for extended periods  

 

    of time, store unit in area free of dust and moisture. 

    We recommend purchasing the Jeanie Rub Bag to 

    protect your Jeanie Rub Massager and this Owner’s  

 

 

   Manual.

6

Отзывы: