Touch Screen Driver Installation
The touch driver is located on the enclosed CD-ROM disk for these
OS: Windows ME / 2000 / XP / Vista / XP Embedded, Linux, CE.NET
Driver Installation Process:
1. Before you start to install the touch driver, please be sure the USB or the RS-232 Serial
cable is connected from the PC or the LCD display.
2. Uninstall any touch screen driver that may be on your system.
3. Click on the driver link found on the CD-ROM.
4. Follow instructions as found below.
5. After installation is complete, click “Finish” and restart your computer to complete
installation.
TPM-193R / TPM-193C Driver Install:
Please Note: The TPM-193R/TPM-193C is available with both RS232 and USB connections.
If you are using RS232 connection, follow the instructions below:
1. Be sure that RS232 cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
If you are using USB connection on VISTA, follow the instructions below:
1. Be sure that USB cable is connected from the computer.
2. Power on the computer.
3. No need to install USB driver from CD due to it is the HID device, system will recognize
the HID device and load driver automatically.
Please note: Do not plug in both RS232 and USB cables. Doing so may cause a driver
con
fl
ict, making your touch screen idle.
If you are using USB connection on non-VISTA operation system, follow the
instructions below:
1. Be sure that USB cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
18
