JDW HF-636P, Инструкция по эксплуатации

Страница: 12 / 22

11
• Be sure that the tone arm is being detached from the
tone arm rest before operating, and re-secured again
afterwards.
1. Press Phono button (23)
2. Set the speed selector (30) to the proper position
depending on the record to be played.
3. Place the record on the platter (use the spindle adaptor
(29) if required).
4. Lift the tone arm from the rest and slowly move it to the
record side. The platter will being to rotate.
5. Place the tone arm to the desired position of the record.
6. Adjust the volume to the desired level.
7. At the end of record, the platter will automatically stop
rotating. Lift the tone arm from the record and return it to
the rest.
8. To stop manually, lift the tone arm from the record and
return it to the rest.
Remark: as some kind of record the auto-stop area was out
of the unit setting, so it will stop before the last track finish. In
this case, select the Auto-stop switch (31) to “ off “ position,
then it will run to the end of the record but will not stop
automatically (turn off the unit by power button or switch back
the auto-stop switch (31) to “ on “ position to stop the platter
rotate). Then put back the tone arm to the rest position.
Playing Compact Disk
Getting started
1. Press CD button (10).
2. Press CD tray open/close button (24) to open the CD tray.
3. Place a CD with the printed side facing up inside the tray.
4. Press the Disc skip button (22) to turning the CD tray and