14
Operation Instructions
4) If the batteries do not charge properly—(1) Check current at receptacle by plugging in a
lamp or other appliance. (2) Check to see if receptacle is connected to a light switch which
turns power off when you turn out the lights. (3) Move charger and tool to a surrounding air
temperature of 40°F (4.5°C) to 105°F (+40.5°C). (4) If the receptacle and temperature are OK,
and you do not get proper charging, take or send the tool and charger to your local service
center. See Tools Electric in yellow pages.
5) The tool should be recharged when it fails to produce sufficient power on jobs which
were easily done previously. Battery life may be greatly diminished if batteries are discharged
deeply. DO NOT CONTINUE using product with its batteries in a depleted condition. Recharge
discharged batteries promptly.
6) To maximize battery life:
a. Do not fully discharge batteries.
b. Fully recharge batteries after each use.
c. Store tool in a location where the surrounding air temperature is approximately 40°F-75°F
(4.5°C - 24°C).
d. Disconnect charger from tool after charge is complete.
WARNING:
Fire Hazard. When
disconnecting the charger from the tool, be sure to unplug the charger from the outlet first,
then disconnect the charger cord from the tool.
Scope of delivery
---Hedge trimmer
---Battery pack
---Charger
---Blade sheath
Operation instructions
Intended use
The hedge trimmer is designed for cutting and trimming of hedges, bushes and shrubs
in domestic gardens.
The maximum cutting capacity must be observed. Do not cut branches exceeding the
stated maximum capacity.
The appliance is suitable for the private use in the garden only, not for continuous
employment in the commercial use.
