JDS Uniphase SmartClass, Руководство пользователя

Страница: 68 / 90

Chapter 7 Interpreting Test Results
VCC scan results
54 SmartClass ADSL/Copper Tester User’s Guide
Table 20 describes the OAM results found as part of the ADSL results.
VCC scan results
The VCC scan results screen provides the VPI/VCI designation and activity
status for up to five (5) virtual circuit connections.
IP pool results
The IP pool test results screen displays the test pool size, the number of
addresses tested, and the number failed.
Port results
The port test results screen shows if each port tested is active or inactive, for
up to eight configured ports.
REPLY Number of loopback messages for which we received a reply.
FAIL Number of messages that failed (usually because we did not
receive a reply).
DELAY The delay measured at this moment.
MIN DELAY The minimum delay measured since the beginning of the test.
MAX DELAY The maximum delay measured since the beginning of the test.
AVG DELAY The average delay measured since the beginning of the test.
Table 20 OAM ADSL results
Result Definition
F5 LB CNT The number of ATM F5 Loopback requests on the near end
and far end.
F4 LB CNT The number of ATM F4 Loopback requests on the near end
and far end.
ATM RDI Number of test seconds during which the RDI condition has
been detected.
Table 19 OAM test results
Result Definition
NOTE:
This test requires a remote source generating the ATM traffic.