JDS Uniphase SK Series, Руководство пользователя, Страница: 13 / 27

7
Getting Started
The SK Series Fiberoptic Switch Module consists of the switch and a ribbon cable with a
standard dual row connector.
Before Initializing and Operating the Unit
Inspect the unit for any signs of damage.
Read the user’s manual thoroughly, and become familiar with all safety symbols and
instructions to ensure that the unit is operated and maintained safely.
Initial Inspection
Warning
To avoid electrical shock, do not initialize or operate the unit if it bears any sign
of damage to any portion of its exterior surface, such as the outer cover or
panels.
Check that the unit and contents are complete:
1. Wear an anti-static wrist strap, and work in an electrostatic discharge (ESD) controlled area.
2. Inspect the shipping container for any indication of excessive shock to the contents, and
inspect the contents to ensure that the shipment is complete.
3. Inspect the unit for structural damage that can have occurred during shipping.
4. Connect a 5 V DC power supply to the switch.
5. Turn on the power.
6. Keep the packaging.
Immediately inform JDS Uniphase and, if necessary, the carrier if the contents of the shipment
are incomplete, if the unit or any of its components are damaged or defective, or if the unit does
not pass the initial inspection.
Operating Environment
In order for the unit to meet the warranted specifications, the operating environment must meet
the following conditions for temperature and humidity.
Temperature
The unit can be operated in the temperature range of 0 to 55 °C.