JDS Uniphase IP Video Test Option HST-3000, Руководство пользователя

Страница: 175 / 356

Chapter 4 IP Testing
Transmitting layer 3 IP traffic
HST-3000 Ethernet Testing User’s Guide
153
Transmitting layer 3 IP traffic
After you configure the layer 3 IP settings, and your unit
successfully determines the destination device’s MAC
address, you are ready to transmit traffic over the link. The
HST automatically sends IPv4 ARP requests or IPv6
Neighbor Solicitation requests as appropriate during layer 3 IP
testing.
To transmit layer 3 IP traffic
1 If you haven’t already done so, launch your application
(see “Launching an application” on page 28 ), and then
select the Layer 3 IP Traffic test (see “Selecting a layer 3
IP test” on page 120 ).
2 Initialize the Ethernet link (see “Initializing the link for
Ethernet testing” on page 47 .
3 Establish an IPoE connection or a PPPoE session:
– If you are transmitting IPv4 traffic, see “Establishing an
IPoE connection for IPv4 traffic” on page 122 , or
“Establishing a PPPoE session” on page 128 .
– If you are transmitting IPv6 traffic, see “Establishing an
IPoE connection for IPv6 traffic” on page 124 .
4 Configure the HST for your test. See:
– “Specifying frame characteristics” on page 51
– “Configuring the traffic load” on page 56
– “Filtering received traffic using layer 2 criteria” on
page 65
– “Specifying IP packet settings” on page 137
– “Filtering received traffic using layer 3 criteria” on
page 142
5 Press the Home button to view the Main screen.