ANT-5 Printout of Result Documentation
M. Hilz File: H:/TSCQ/Tac/Geraete/ANT-5/Datatransfer/ANT5_Resulttransfer.doc
Once the connection between PC and ANT-5 has been established, a transfer of results can be
executed. To enable a result transfer, a username and password is required.
Depending on the hardware versions different entries are necessary.
ANT-5 HW02 (BN4565/02
Username: guest
Password: guest
ANT-5 HW03,05 (BN4565/03, 05)
Username: vxWorks
Password: password
ANT-5 HW 06 (BN4565/06
Username: ant5
Password: BN4565
(Attention: Usernames and Passwords are case sensitive)
Example:
ftp://vxWorks:[email protected]
for software version 11.xx
ftp://ant5:[email protected]
for software version 12.xx
6.) Transfer of results via Remote Operation.
Remote Operation is achieved by establishing a suitable communication link over an Ethernet
LAN. The setup of the communication links is outlined in chapter 5 above.
Once the link has been successfully set up, the PC is able to communicate with the ANT-5 using
the GUI faceplate of the corresponding Remote operation client. First, check the software version
of the ANT-5’s software currently installed, after that install the same software version available
from:
ftp://ftp.germany.acterna.com/Access/ANT-5/Remote_client/
or, if available, use the CD containing the remote/offline viewer software.
As the Remote Operation software is an optional package (BN 4565/95.60), make sure the option
is successfully loaded into the ANT-5.
