JDS Uniphase 2000 Platform, Руководство пользователя

Страница: 103 / 123

Chapter 11 Maintenance and Troubleshooting
Maintenance procedure
84 User Manual 790000002/00
Installing a new
version of the
software
Downloading from
Internet
When the software is obtained from the Internet, it must be saved on a
storage medium before the software upgrade of the product can be
carried out. To do this:
1 Open Internet Explorer
2 On the JDSU web site
(http://www.jdsu.com),
open the page of the
product concerned
– MTS 2000 Multiple Services Test Platform
or
– T-BERD 2000 Multiple Services Test Platform
3 Click on the tab Downloads .
4 Click on the link 2000 Firmware Update
A new page opens, displaying the current version available and
several links.
5 Click on the icon or on the exe file to load the archive.
6 In the new dialog box displayed, click on Save to save the exe file
on the PC.
7 Once completed, connect the USB memory stick to the PC and
follow the instructions chapter
“Installation from a USB memory
stick” on page 84 , from step 2 .
Installation from a
USB memory stick
You must be equipped with a USB memory stick with a minimum capacity
of 128 Mo.
When a new software version is loaded, there is a risk of re-initializa-
tion of the internal memory. Before installing the new software, it is
therefore advisable to save the results in the memory, using the
Save
function called up by the
F
ILE
button.
Do not interrupt the installation process, as this could damage the
instrument.
To avoid any interruption of the installation procedure, the 2000 Plat-
form must be operating on the mains: if the procedure is started while
operating on battery, a message indicates that the instrument must be
connected to the mains.
2000 Platform English rev00.book Page 84 Lundi, 20. juin 2011 1:47 13