JDE PROFESSIONAL Milk Master Pro, Руководство пользователя

Страница: 25 / 28

25 User manual
Error ID Description Activate error code Clear error code
E247 0 Gear pump not connected Wiring disconnection detected
Press the lock or reset button for
at least 5 seconds, or disconnect
the mains power plug for 5
seconds then reconnect it, to
reboot the coffee dispenser.
If the error code reappears
after restarting, turn the coffee
dispenser OFF and contact a
service technician.
E247 2 Gear pump friction to high Gear pump overloading
E247 10 Air valve not connected Wiring disconnection detected
E247 11 Air valve short to ground Wiring short circuit detected
E247 12 Water valve not connected Wiring disconnection detected
E247 13 Water valve short to ground Wiring short circuit detected
E247 14 Milk valve not connected Wiring disconnection detected
E247 15 Milk valve short to ground Wiring short circuit detected
E247 16 Cleaning valve not connected Wiring disconnection detected
E247 17 Cleaning valve short to ground Wiring short circuit detected
E247 18 Flush valve not connected Wiring disconnection detected
E247 19 Flush valve short to ground Wiring short circuit detected
E247 20
Flow meter no water flow
detected
Water disconnected/turned
off, no water pressure at mains.
Flowmeter, pump, or water inlet
valve faulty or disconnected.
Confirm that the mains water
supply is open and water is
flowing. Then press the lock or
reset button for at least 5 seconds,
or disconnect the mains power
plug for 5 seconds then reconnect
it, to reboot the coffee dispenser.
If the error code reappears
after restarting, turn the coffee
dispenser OFF and contact a
service technician.
7 - Error codes
The Milk Master Pro connects to a paired coffee dispenser via a software interface and a CAN-BUS
communication cable.
Error codes will be shown on the paired coffee dispenser’s display.