20
User manual
7- Cleaning
A
B
A
B
Fig.1
B
20
min
Fig.2
1. Remove the mixing tray.
A. Open the water treatment panel (A) (See Fig.1).
B. Pull the mixing tray straight out (B) (See Fig.1).
i
Note:
To save dispensing time, it is recommended to use the
included service kit, which contains a clean mixing tray.
Then, the dirty parts can be cleaned and exchanged the
next time the mixing tray is cleaned.
2. Place the mixing tray in a bin with locally approved
food-grade cleaning agent and hot water and soak for
approximately 20 minutes (See Fig.3). Rinse with clean water
and dry before replacing. (Proceed to next page).
i
Note:
Comply with the safety instructions and cleaning
instructions on the cleaning agent packaging.
Optionally, the mixing tray can be washed in a
dishwasher.
4. The display will show:
REINSTALL MIXING TRAY, REINSTALL
WATER TREAMENT PANEL
, slide the cleaned mixing tray
back into its original position (A) and close the water
treatment panel (B) (See Fig.4).
i
Note:
There is a sensor that detects if the mixing tray is in
the correct position. It is not possible to continue the
cleaning process until the mixing tray is installed in the
correct position.
Warning:
The flushing water is very hot! Avoid scalding! Keep
hands and other body parts away from the dispenser
during the flushing process. Never let children perform
the cleaning procedures.
Fig.4
Fig.3
7.6 Removing and cleaning the mixing tray
