WHEELS AND BEARINGS
Under normal circumstances and conditions JD Bug wheels and bearings are
maintenance free. Nonetheless, it is the responsibility of the owner or guardian
to periodically inspect the wheels for wear and tear, the axle bolts for proper
tightness, and bearings for play and any loose parts on the scooter.
When a wheel or bearing develops play, this is an indication of excess wear and
replacement is necessary. Replace immediately with genuine parts.
Worn tyres/wheels/bearings are considered normal wear and tear and are not
covered by the JD Bug Limited Warranty. Wheels other than genuine JD Bug
wheels may not be compatible with your JD Bug scooter. The use of anything
other than genuine JD Bug replacement parts may affect your safety.
HOW TO RIDE YOUR SCOOTER
Place one foot on the footplate, push forward with the other foot and steer the
scooter.
For enhanced cornering, lean slightly into the direction of the turn.
For controlled stops, apply the brake by stepping on the rear brake. JD Bug
recommends that you practise applying the brake at various speeds and in an
open area free from obstructions before riding your JDBug around others.
Wheelies and other stunt type riding reduces your ability to manoeuvre and
control your scooter. Take the necessary precautions, such as wearing appropriate
protective gear and practise in an area safe for stunt riding and free from
obstructions. It may be dangerous to you and others using the scooter in public
areas or roads.
WARNING:
Please refer to the following diagram when reading the rest of the manual, each
part of the scooter is clearly labelled to help understand the assembly, and to
order spare parts for your JD Bug Scooter.
JD BUG SCOOTER COMPONENTS
B. Footplate/Steering Column Adjusting Screws(s).
Using an Allen Key, and with the scooter in the upright and locked position
(Figure 7), adjust the set screw at the footplate until there is no free play
between the footplate and the steering column. Be careful not to over tighten
this screw as it needs to only be snug against the steering column. Verify the
adjustment by releasing the steering column from the locked position and
folding the scooter. The locking latch should not bind and the folding movement
should be smooth
Figure 7
Keep your fingers clear of the pivoting mechanism when folding or
unfolding the scooter.
WARNING:
CLEANING YOUR SCOOTER
Wipe with a damp cloth to remove dirt and dust.
Do not use industrial cleaners or solvents as they may damage the surfaces. Do
not use alcohol, alcohol based or ammonia based cleaners as they may damage
or dissolve the plastic components or soften the decals or decal adhesive.
Содержание MS-305
Страница 1: ......
