Method two
：
Remove the water tank from main body, open the
water tank cup 5 by counterclockwise rotation, fill
the water tank from water faucet. ,and then clockwise
rotation to close water tank cup 5.
Install the water tank 7to main body until it clicks into place.
2. Plug in the appliance to a grounded outlet.
3. When switch the appliance on, the indicator lights will turn red at the each side of
water tank, it indicate preheating. If the lights does not illuminate, please check the
"troubleshooting" section for more details.
4. It will takes approximately 25 seconds for preheating. Once the steam mop is ready
to use the water tank will glow blue.
5. When the water tank full fill with water, it can work approximately 20 minutes. If the
water tank 7 without water, the indicator lights 12 will glow red,and the lights will
flash to point out need to add water
NOTICE
：
If power off during preheating or after preheating,then power
again,the appliance will repeat above preheating action.
6.Press the steam button 4 and steam button13, the steam out.
7.Add control volume by turn steam control knob 8
clockwise
，
and counterclockwise to reduce. User
can adjust steam volume according different objects
NOTICE
：
steam volume control by PCB, It will takes 3 seconds adaptation time
when you adjust steam volume .It is normal phenomenon.
8. When normal cleaning, the steam head
has big rotary angle, can clean corners
and also can clean low space.
USE AS A STEAM CLEANER IN HAND
Push Lock Catch, take the main body A out of holder A, and also take out the
power cord.
Install the accessory adaptor at the top of main body A, until it into place.
Press salient point at the accessory adaptor to remove the accessory adaptor
from main body A
Choose the appropriate accessories(check accessories use list),according to
arrow indicator to align and implant to accessory adaptor G, then turn
anticlockwise, until it into place.
