JD-MEDIA ZA-1120A Скачать руководство пользователя страница 8

6

전면의 ⑦번 스피커 존 선택 스위치를 누르면 선택된 존별로 출력됩니다.
만약, ALL CALL 스위치나 P.T.T.마이크(PTT-100)및 REMOTE CONTROLLER
(RC-100)의 존 선택 스위치를 누르면 존 출력이 100V/70V(OPTION)출력으로 
전환됩니다.

11.DC POWER, POWER REMOTE

ANT. terminal is packed with tuner pack(TP-100)

13.ANT. TERMINAL(OPTION)

14.REMOTE CONTROL RECEIVER(OPTION)

Pushing speaker zone selector(front panel NO.7), signal will be assigned to
the selected zone. If all call switch, P.T.T microphone(PTT-100) priority and
zone selector of remote controller(RC-100) are Activated, selected zone 
output are reseted to 100V/70V output.

7. SPEAKER ZONES & ATT. OUTPUT

Direct out jack has been designed for low impedance output(4ohm) with
concerning ATT. control.

OUTPUT IMPEDANCE :

 ZA-1120A : 40ohm/22V, ZA-1240A : 4ohm/31V.

8. LOW IMPEDANCE OUTPUT

9. TELEPHONE

This is a switch terminal which make first ranking priority memoried on memory
bank No.6 against other memory bank on the digital message(DM-100)
how to set first priority racking. 
First, be sure to place "off" of MS802 PCB/RR-100(

) after recording on 

the M6 of DM-100. Scound, move SW305 on the front PCB to the "PRIORITY". 
Third, contact terminal to what you want.

10.MESSAGE FIRST PRIORITY

Connect power plug after main power switch "OFF" and fuse blown-up, 
disconnect power cord and replace it. Fuse is in the power PCB FU901.

Remote control receiver lets you connect 3 PCS of remote controls 
simultaneously by 4 pairs LAN cable at the 100m MAX.

12.AC POWER INLET

IMPORTANT NOTE : When placing "OFF" MS802 of RR-100. 
it is impossible to play, repeat, warnning of memorybank M6 by RC-100. 
The main reason we designed like the above is to protect mistake like 
playing of M6 when factory production for the adove, front PCB SW305 
is "SLAVE", MS802 of remote receiver PCB is "OFF".

IMPORTANT NOTE : Maximum power output per zone speaker.
(ZA-1120A :25W MAX, ZA-1240A :50W MAX).
For the direct output, use spk zone 4 and set speaker ATT. to the NO.6.

7. SPEAKER ZONES & ATT. OUTPUT

이 스피커 출력은 4ohm 출력으로 설계되어 있으며 ATT.CONTROL의 영향을 
받지 않습니다.
정격출력 임피던스(ZA-1120A : 4ohm/22V, ZA-1240A : 4ohm/31V).

8. LOW IMPEDANCE

9. TELEPHONR

In case of nomal operation of data of data receipt, data LED indicator will 
be turn "ON".

DATA LED INDICATOR

SLAVE SELECTOR : All signal output of remote controller(RC-100) will
be closed under setting "on" of priority switch on the rear of P.T.T remote
(PTT-100). (SLAVE/PRIORITY switch of RC-100 to "SLAVE")
PRIORITY SELECTOR : Remote controller(RC-100) is prior to any other 
prioroty priority is activated, an signals are closed(But, P.T.T MIC signal
can be activated is spite of priority).

SLAVE/PRIORITY

존별로 스피커를 연결시 규정된 출력을 초과하여 운용하지 마십시오.
(ZA-1120A : 25W MAX, ZA-1240A : 50 MAX).
1개의 HI-IMP출력으로 스피커 시스템을 구성시에는 스피커 존 4번 출력을 
사용하십시오. 그리고 ATT. 세렉터는 반드시 6번 위치로 돌리고 존 선택 스위
치를 누르십시오.

중요사항

RR-100의 MS802를 "OFF" 위치로 끼우면 리모트 콘트롤(RC-100)에서는
M6의 녹음된 경고 방송 재생 컨트롤은 불가능합니다.
이런 방식으로 설계한 목적은 리모트 콘트롤 운용시 실수로 M6 신호를 재생
시킬수 있으므로 MS802를 강제 수단으로 "OFF"위치로 끼우게 되는 것입니다.
기본적으로 생산 출고시는 전면PCB SW305를 SLAVE위치, REMOTE RECEIVER
PCB의 MS802를 "OFF"위치로 끼웁니다.

중요사항

퓨즈는 내부의 POWER PCB FU901이며 퓨즈가 용단시 규격품을 사용하십시오.

중요사항

Connect night ringer terminal to telephone LINE. You can hear telephone
ring Via speaker from other office in  the night.

NIGHT RINGER

Connect paging terminal to telephone exchanger.

PAGING IN

This terminal is emergency power battery connection. 
The battery connection cord has to be 3.0

㎟ 

in dimeter and this diameter 

should not be any longer than 7 meters(the loss of power 1V).
Fuse is located in the PCB FU903 (ZA-1120A : T10A 250, ZA-1240A : 
T20A 250V). 

DC POWER

You can turn on/off amplifier by remote control

POWER REMOTE

NIGHT RINGER

야간 벨 울림 기능을 위한 90V링 신호 입력 단자로서 전화 선로에 반드시 직접
연결하시오.

11. DC POWER, POWER REMOTE

DC POWER

교류 전원 정전 또는 비상시 전원을 공급하기 위한 배터리 연결단자 입니다.
배터리 연결 케이블은 직경이 3.0㎟ 이상 길이는 8m이내로 사용하십시오.
(전력 손실이 약 1V이하). 퓨즈는 내부의 POWER PCB FU903이며 퓨즈가 용
단시 규격품을 사용하십시오.
(ZA-1120A : T10A/250V, ZA-1240A : T20A/32V).

POWER REMOTE

제품의 주 전원 스위치가 "OFF"된 상태에서 제품에 전원 공급을 CONTROL
하기 위한 REMOTE 파워 스위치 연결단자 입니다. 

DATA LED

REMOTE CONTROLLER가 연결된 상태에서 DATA 수신시 LED가 "ON"됩니다.

SLAVE/PRIORITY

SLAVE 선택시 : P.T.T리모트(PTT-100) 뒷면의 PRIORITY 스위치를 "ON"으로
설정된 상태에서 MIC스위치를 누르면 리모트 콘트롤(RC-100)의 모든 신호출
력이 중단됩니다. 
(단, RC-100의 뒷면 SLAVE/PRIORITY 스위치를 SLAVE로 설정시 가능.)
PRIORITY 선택시 : REMOTE CONTROLLER(RC-100)이 본체의 모든 신호에
대하여 우선권이 부여되어 REMOTE CONTROL시 다른 신호의 방송이 중단됩
니다.(단, P.T.T MIC신호는 REMOTE CONTROL과 동급이므로 방송이 가능함.)

PAGING

전화 페이징 방송을 위한 신호 입력단자로서 반드시 전화 교환대의 페이징 신
호 단자와 연결하시오.

10.MESSAGE FIRST PRIORITY

DIGITAL MESSAGE(DM-100)메모리 뱅크 M6에 녹음된 신호가 다른 신호원보다
최우선이 되도록 CONTROL하는 스위치 터미널 입니다.
시스템 설치시 예상 경고 방송을 DM-100의 M6뱅크에 녹음을 시키고 리모트 
리시버 PCB RR-100(⑭)의 MS802를 "OFF" 위치로끼우십시오.
그리고, 전면 PCB SW305스위치를 PRIORITY 위치로 이동시켜 주십시오.
이런 조건으로 설정된 상태에서 MESSAGE FIRST PRIORITY단자를 쇼트시키면 
M6의 녹음 신호가 최우선으로 방송됩니다.

12.AC POWER INLET

교류전원 공급 소켓이며 전면의 주 전원 스위치가 "OFF"된 상태에서 전원 코드
를 끼워주십시오.

13.ANT TERMINAL(OPTION)

AM/FM 안테나 터미널로서 튜너 팩(TP-100)에 터미널이 포장되어 있습니다.

14.REMOTE RECEIVER RR-100(OPTION)

REMOTE CONTROLLER(RC-100)와 연결되며 RC-100은 동시에 3대까지 연결
이 가능합니다. 사용되는 케이블은 LAN CABLE 4 PAIRS를 사용해야 DATA누화
를 방지할 수 있습니다. RC-100 3대는 최대 100m까지 케이블 연장하여 운용할 
수 있습니다.

POWER

ZA-1120A

JST-19-12/SB3.15A 250V

JST-19-12/SB7A 250V

JST-19-2224/T2AL 250V

T901/120VAC

T901/220~240VAC

ZA-1240A

MODEL

JST-19-2224/T4AL 250V

POWER

ZA-1120A

JST-19-12/SB3.15A 250V

JST-19-12/SB7A 250V

JST-19-2224/T2AL 250V

T901/120VAC

T901/220~240VAC

ZA-1240A

MODEL

JST-19-2224/T4AL 250V

R

EAR PANEL CONTROLS 

(후면기능)

Содержание ZA-1120A

















Отзывы: