JCM UBA Pro RQ Series, Руководство по интеграции

Страница: 12 / 58

P/N 960-000209R_Rev. A © 2019, JAPAN CASH MACHINE CO., LTD.
2
Section 1 UBA Pro RT/RQ™ Series Banknote Recycler General Information
Model Descriptions
Table 1 lists the RT/RQ Product Model Num-
ber Descriptions.
Type Descriptions
Table 2 lists the RT/RQ Type Number Descrip-
tions.
Software Descriptions
Table 3 lists the RT/RQ Software Number
Descriptions.
Precautions
The Figure 2 symbols are defined as follows:
1.
(Type 1)
Do not insert a damaged or exhibited
unfit condition Banknote; it may cause a jam
inside the unit.
2.
(Type 2)
Do not expose the unit to water. The unit
contains several precision electronic devices that
can be damaged if water or any liquid is sprayed
or spilled into the unit.
3.
(Type 3)
Do not install the unit in a dusty
environment. Dust may damage the unit or
degrade its performance.
Table 1 RT/RQ Product Model Number
Specifications
N
o
(1) Model Name (UBA Pro Series)
*
*. Refer to the UBA Pro Series Universal Banknote Acceptor Integration Guide for
the UBA Pro Unit’s details.
(2)
Validation Sensor
5 = World Wide Type 1 (Standard)
6 = Reserved
(3)
Barcode Sensor Board (Optional)
0 = Upper only (Standard)
1 = Upper and Lower
(4)
Acceptor Head Unit Type
0 = Centering Type (Banknote Short Side: 62mm - 85mm)
†
1 = Reserved
†. The acceptable Banknote width depends on the Cash Box. Refer to “Technical
Specifications” on page 7 for each Cash Box’s acceptable Banknote size.
(5) Input Section Unit (Optional)
None = Standard
(6)
Stacking Type
SH2 = Horizontal Down (82mm, SH2 Box)
SS = Vertical Down (85mm, Large Box)
(7) Cash Box Access
None = Front Access (Standard)
(8)
Recycler Type
RT = 1 Recycler (Twin Drums)
RQ = 2 Recyclers (Quad Drums)
Table 2 RT/RQ Type Number Specifications
N
o
(1)
Cash Box Capacity
4 = 400 notes, SH2 Box (New Banknote)
8 = 800 notes, Large Box, (New Banknote)
(2)
Cash Box Type
0 = Standard
(3)
Cash Box Handle
0 = Standard
(4)
Sub Board Type
0 = Reserved
1 = Reserved
2 = Sub Board 2 (RS232/Photo-Coupler Isolation/TTL/ccTalk/1 USB)
3 = Reserved
4 = Reserved
(5)
Acceptor Head Unit Cover
0 = Black (Standard)
(6)
Bezel
0 = No Bezel
1 = Black/2 Green LEDs (Bezel 85) (Standard Installation)
2 = Reserved
8 = Reserved
9 = Reserved
A = Reserved
B = Black/2 Blue LEDs (SU Installation)
(7)
Bezel Spacer
*
0 = No Bezel Spacer
1 = With Bezel Spacer
(8)
Optional Circuit Board
0 = Reserved
Model: UBA - 5 * 0 - (*) * * (*) - * *
(1) (2)(3)(4) (6) (7) (8) (5)
Type: * * * - * * - * * * * * * *
(1)(2)(3) (4) (6)(7)(8)(9)(10)(11)(12) (5)
(9)
Interface Setting (Factory Default)
†
P = Photo-Coupler Isolation
R = RS232C
(10)
External Harness
0 = Reserved
1 = Standard Harness (with power cord)
2 = USB I/F Harness (with power cord)
(11)
Cash Box Faster/Lock (Optional)
0 = None
1 = Thumb Twist Lock Fastener for the Cash Box
(12)
Battery (For Recycler Detection)
0 = No Battery
1 = Battery Equipped
*. Small pieces of paper or receipts might accidentally be inserted into the UBA Pro
Unit. The Bezel Spacer makes the distance to the Sensor longer and the Sensor
may not detect such foreign objects. Also, small pieces of paper or receipts are dif-
ficult to detect and remove.
†. Refer to “SW1 and SW2 Configurations” on page 11 for details.
Table 3 RT/RQ Software Number Specifications
N
o
(A) Software Model Name
(B) Country Code (Denomination)
*
*. The Country Code is indicated by three (3) Alphabetical Characters following the
JIS Standard.
(C) Interface Protocol Name
(D) Software Version
Table 2 RT/RQ Type Number Specifications
N
o
Type: * * * - * * - * * * * * * *
(1)(2)(3) (4) (6)(7)(8)(9)(10)(11)(12) (5)
(A) (D)
UBA-5**-(*)**(*)-RC-T/Q * * * - 0 * * - V * .**
(B) (C)
Caution: User cautions should be
included in any user guides or manuals.
Figure 2 Precautionary Symbols
Type1 Type2 Type3
Figure 2 Precautionary Symbols
NOTE: Refer to “Banknote Fitness
Requirements” on page 4.