© 2016 JCM American Corporation
1 9
Lecture Notes
TBV Transaction Based Validator
October, 2016
M
OTOR
T
ESTS
Ten Motor Tests are available for the TBV Unit.
To perform each Motor Test, proceed as follows:
1. In the
MOTOR TEST
Section, click the desired Test Screen Button (Figure 11
a
)
to begin the test (e.g.,
TRANSPORT MTR FWD
).
2. Confirm proper operation.
The Bezel LED will be lit
BLUE
.
3. To end the Test, click the
“
Stop
”
Screen Button.
NOTE: Refer to Table 11 on page 20 for a list of Motor Test Screen Buttons. Only
Motor Tests that are applicable to the TBV Model connected will be accessible.
NOTE: If an Error condition occurs (indicated by the
RED
Bezel LED Flashing),
refer to Operational Error Codes on page 27 for details about the Error condition.
a
Figure 11
TBV Performance Tool - Motor Test Options
