RS3 SYSTEM
jcm
technologies
3
IMPORTANT SAFETY INSTRUCTIONS
Disconnect power supply whenever you proceed any installation or repair of the equipment.
In accordance with the European low voltage directive, the following requirements are informed:
· For permanently connected equipments, an easy-access connection device must be provided.
· This system must only be installed by qualified persons with experience in automatic doors/gates installations
and with knowledge of the applicable EU standards.
· The instructions for use of this equipment must always remain in the possession of the user.
· RADIOSENS system’s work frequency does not interfere with the 868 MHz remote control systems.
· Follow all the recommendations given in this manual to avoid serious dangerous to persons.
More tips, interactive demos and online videos