RS3 SYSTEM
jcm
technologies
4
1.
Introduction
1.1 General description
RadioSens3 system is designed for Fast doors and Flat-slat rolling shutters in an Industrial, Commercial or
Residential environment. RadioSens3 is an impact detection system installed at the principal edge of the door. It
works detecting any obstacle before the strength exceeds regulations limits and then inverting door movement.
RadioSens3 is a wireless system based on an RF transmitter and a receiver card plugged in the control panel
which permanently monitors the status of the transmitter programmed.
The RadioSens3 system (RS3 T868, RS3 TGL868 and RSEC3) complies with the EN ISO 13849-1:2015
standard, category 2, PLd. Certified by TÜV NORD CERT GmbH.
MINIMUM REQUIREMENTS:
- Minimum speed at any point of the door: 0,1m/s
- Door Maximum width: 4 meters
- Maximum tolerance in door repetitive movements: 5%
- Minimum distance between the last 2 slats: 2mm
- RS3 installation in the central part of the door
