GEN2U™ Printer
© 2016, JCM Global Corporation
10
Part No. 960-000177R_Rev. A
a
Figure 9
Upgrading Boot/BSP Alert! Screen
NOTE: If the “Upgrading Boot/BSP - Alert!” message
appears (Figure 9), the Upgrade Key must be
installed to complete the Upgrade. To do so:
1. Remove the Rubber Cap from the 4-Pin Connector
(on the Printer’s right side).
2. Insert the Upgrade Key into the 4-Pin Connector
(Figure 10
a
).
3. Click
Yes
in the Upgrading Boot/BSP-Alert! dialog
box (Figure 9
a
).
Upgrade Key
4-pin Connector
a
Figure 10
Inserting Upgrade Key in 4-pin Connector (Right side)
GEN2U_Fl
ipBoo
kRev
A_v12
.fm Page 10 Thursd
ay, Octob
er 6,
2016 1:2
9 PM
