ACCESS-5K
Safety instructions
Use of the system
EC Declaration of conformity
12 -
jcm
technologies
Disconnect the power supply whenever you proceed to the installation
or repair of the control panel.
In accordance with the European low voltage directive, you are infor-
med of the following requirements:
• For permanently connected equipment, an easily accessible connec-
tion device must be incorporated into the cabling.
• This system must only be installed by a qualified person that has
experience with automatic doors/gates and knowledge of the relevant
EU standards.
• The instructions for use of this equipment must always remain in the
possession of the user.
This equipment is designed for applications where pedestrian doors
installed on garage doors. It is not guaranteed for directly activating
equipment other than that specified.
The manufacturer reserves the right to change the specification of the
equipment without prior warning.
JCM TECHNOLOGIES, S.A. declares herewith that the product AC-
CESS-5K complies with the requirements of the 1999/5/ CEE R&T-
TE Directive, and complies with the fundamental requirements of the
2004/108/EC Directive on electromagnetic compatibility and 2006/95/
EC on low voltage, insofar as the product is used correctly.
See web www.jcm-tech.com/en/declarations
UM_3200401_EN_Rev00.pdf
