jcm-tech BIO100, Руководство по установке

Страница: 3 / 20

UM_3201027_BIO100_EN_Rev00 3/20
1
Description
BIO100 is a Wiegand biometric reader for access control applications. It offers
storage up to 100 fingerprints and programable Wiegand Output (8 to 128 bits).
Configuration of the readers and fingerprint enrollment is done through CONTROL
PC Software.
Connection between the biometric readers is RS485 and it is used for fingerprint
transfer and configuration.
The tamper switch output can trigger the alarm system, if an attempt is made to open
or remove the unit from the wall.
The sensor incorporates dedicated sensing hardware to facilitate the detection of
“spoofing” attacks based on fake fingers. This data is embedded into the image data
stream, and is processed on the processor. The system is capable of detecting and
defeating well-known fake finger mechanisms, such as molded “gummy” fingers.
The coating on the surface of the TouchChip sensor provides protection from
scratching and abrasion due to normal contact with fingertips and any incidental
contact with fingernails.