P/N 960-100928R_Rev. 3 {EDP #192692}
© 2018, JAPAN CASH MACHINE CO., LTD.
A - 3
Troubleshooting
UBA-RC™ Series Banknote Recycler
Appendix A
Table A-3 and Table A-4 list the two (2) Tri-Color LED Status/Error Code indications for the Recycler
Unit Assembly.
Table A-3
Recycler Unit LED Code Conditions
Left LED
Right LED
Causes
Extinguished (Out)
Flashes or lit a
Red
,
Green
or
Yellow
Color
While storing Banknotes, or during an error occurring when Banknotes are being
stored. Count the flashes of the specific Color to define the error condition being
indicated (see Table A-4 “Various Recycler Unit LED Flashing Error Code
Conditions ” for more detail).
Flashes or lit a
Red
,
Green
or
Yellow
Color
Extinguished (Out)
While dispensing Banknotes, or during an error occurring when dispensing
Banknotes. Count the flashes of the specific Color to define the error condition
being indicated (see Table A-4 “Various Recycler Unit LED Flashing Error Code
Conditions ” for more detail).
Flashes (Green)
Flashes (Green)
A Stand-by
*
Error occurred. Count the flashes of the specific Color to define the
error condition being indicated (see Table A-4 “Various Recycler Unit LED
Flashing Error Code Conditions ” for more detail).
*. This condition can exist when the UBA-RC is not performing a Banknote storage, and an error has occurred.
Lit (Red)
Lit (Red)
An
UBA-RC
™
Software booting error occurred.
Lit (Yellow)
Lit (Yellow)
Downloading UBA-RC
™
Software into the Unit.
Lit (Green)
Lit (Green)
A Reset was not performed after power was supplied.
Table A-4
Various Recycler Unit LED Flashing Error Code Conditions
LED Flashes
Error Causes
0
UBA
™
Transport Unit Performance Error.
1
UBA-RC
™
Motor Speed Error.
2
Unit disabled to confirm that the RC1 Space Transport Motor is performing correctly.
3
Unit disabled to confirm that the RC2 Space Transport Motor is performing correctly.
4
Unit disabled to confirm that the RC1 Flapper is performing correctly.
5
Unit disabled to confirm that the RC2 Flapper is performing correctly.
6
Unit disabled to confirm that the Lifter is performing correctly.
7
Banknote Jam occurred in the Transport Path when storing a Banknote into the RC1 Space.
8
Banknote Jam occurred in the Recycler Unit when storing a Banknote into the RC1 Space.
9
Banknote Jam occurred in the Transport Path when storing a Banknote into the RC2 Space.
10
Banknote Jam occurred in the Recycler Unit when storing a Banknote into the RC2 Space.
11
Banknote Jam occurred in the Transport Path when storing a Banknote in the Cash Box.
12
Banknote Jam occurred in the Cash Box when storing a Banknote to the Cash Box.
13
Banknote Jam occurred in the Transport Path when dispensing a Banknote from the RC1 Space.
14
Banknote Jam occurred in the Recycler Unit when dispensing a Banknote from the RC1 Space.
15
Banknote Jam occurred in the Transport Path when dispensing a Banknote from the RC2 Space.
16
Banknote Jam occurred in the Recycler Unit when dispensing a Banknote from the RC2 Space.
17
Unit disabled to access to the EEPROM, or the Sensors are not calibrated.
18
Double Note Detection Sensor Magnification Error.
