INSTALL
COMPOUND
CARTRIDGE
INSTALL
MIXING
NOZZLE
Lift cartridge clip on
dispensing gun and slide
cartridge into place,
aligning larger side of
cartridge with larger slot.
Lower cartridge clip to
secure
.
Remove cap from
compound cartridge.
Position mixing nozzle
on cartridge and rotate
clockwise 1/4 turn to lock
in place.
For new cartridges only,
dispense a small amount
of compound on to waste
paper.
MICROSET is supplied in a two part cartridge which is dispensed
through a static mixing nozzle using a hand held dispenser. The
two components of the cartridge are mixed together as they pass
through the static mixing nozzle during the dispensing procedure.
This ensures air-free mixing and minimum wastage of material during
application.
The curing rate for MICROSET compounds varies with temperature.
Low temperature increases curing time. High temperature decreases
curing time. Refer to the details printed on the cartridge.
Содержание 4400M
Страница 3: ...Compounds and Curing Times ...
