23
Important Product Information Guide
This
Important Product Information Guide
contains safety and handling for JCB Toughphone.
Look for recycling, disposal, and other environmental information in the
JCB Toughphone User Guide
at:
http://www.jcbphone.co.uk/
To avoid injury, read all operating instructions and the following safety information before using JCB
Toughphone. For detailed operating instructions, read the
JCB Toughphone User Guide
on your JCB
Toughphone by visiting
http://www.jcbphone.co.uk/
Important Safety and Handling Information
WARNING:
Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage to JCB Toughphone or other property.
General Useage : JCB Toughphone has been designed to be significantly more rugged than a normal
mobile phone, however it is NOT indestructible.
Carrying and Handling JCB Toughphone :
JCB Toughphone contains sensitive components Do
not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or
insert foreign objects into JCB Toughphone. Do not use JCB Toughphone if it has been damaged
—for
example, if JCB Toughphone is cracked, punctured, or damaged by water.
The screens of JCB
Toughphone are made of glass. This glass could
break if JCB Toughphone is dropped on a hard
surface or receives a substantial impact or is crushed, bent, or deformed. If the glass chips or cracks,
do not touch or attempt to remove the broken glass. Stop using JCB Toughphone until the glass is
replaced by a JCB Toughphone Authorized Service Provider. Glass cracked due to misuse or abuse is
not covered under the warranty.
Keeping the Outside of JCB Toughphone Clean
Clean JCB Toughphone immediately if it comes
into contact with any contaminants that may cause stains, such as ink, dyes, makeup, dirt, food, oils,
and lotions. To clean JCB Toughphone, unplug all cables and turn off JCB Toughphone. Then use a
soft, slightly damp, lint-
free cloth. Avoid getting moisture in openings. Don‘t use window cleaners,
household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean JCB
Toughphone. The front screen surfaces have an oleophobic coating. To remove fingerprints, simply
wipe these surfaces with a soft, lint-free cloth. The ability of this coating to repel oil will diminish over
time with normal usage, and rubbing the screen with an abrasive material will further diminish its effect
and may scratch the glass.
Dust and Water
The JCB Toughphone in fully tested to meet either IP54 or IP67 specifications
(depending on the model). It is very important to note that all of the Toughphone connectors, covers
and battery compartment must be correctly fastened and have the correct 0-rings fitted to meet the
