jcb JCB-SCMS210 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 48

background image

A moment of inattention while
operating power tools may result in
serious personal injury.
b) Use personal protective
equipment. Always wear eye
protection. Protective equipment
such as dust masks, non-skid safety
shoes, hard hat or hearing protection
used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger
on the switch or energising the power
tools that have the switch on invites
accidents.
d) Remove any adjusting key or
wrench before turning the power
tool on. A wrench or key left attached
to a rotating part of a power tool may
result in personal injury.
e) Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear
loose clothing or jewellery. Keep
your hair, clothing and gloves away
from moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the
connection of dust extraction and

collection facilities, ensure that
these are connected and properly
used. Use of dust collection can
reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool.
Use the correct power tool for your
application. The correct power tool
will do the job better and safer at a
rate for which it was designed.
b) Do not use the power tool if
the switch does not turn it on
or off. Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the power tool from
the power source and/or battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power
tools. Such preventative safety
measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these Instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of moving parts
and any other condition that may
affect the power tools operation.

«
1
2
3
4
5
...
»

Содержание JCB-SCMS210

















































Отзывы:

Нет отзывов

Похожие инструкции для JCB-SCMS210

Бренд: Makita Страницы: 8

Бренд: Makita Страницы: 4

Бренд: Makita Страницы: 2

Бренд: Makita Страницы: 7

Бренд: Makita Страницы: 8

Бренд: Hafco Metalmaster Страницы: 34

Бренд: Target Страницы: 36

Бренд: Fox Страницы: 102

Бренд: ISC Страницы: 78

Бренд: Yamato Страницы: 33

Бренд: Gröne Страницы: 134

Бренд: Skil Страницы: 92

Бренд: Craftsman Страницы: 20

Бренд: Husqvarna Страницы: 17

K 3000-Cut-n-Break

Бренд: Husqvarna Страницы: 34

Бренд: Husqvarna Страницы: 18

Бренд: Husqvarna Страницы: 15

Бренд: Husqvarna Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды