JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
WOOD CUTTING
For easier control use low speed to
start cutting, then increase to the
correct speed.
METAL CUTTING
This saw has different metal cutting
capacities depending upon the type
of blade being used and metal being
cut.
Use a finer blade for ferrous metals
and a coarse blade for non-ferrous
metals.
When cutting thin gauge sheet
metals,
ALWAYS
clamp wood on
both sides of the sheet. This will
give you a clean cut without excess
vibration or tearing of the metal.
DO NOT
force the cutting blade.
Forcing the blade will reduce blade
life and cause the blade to break.
NOTE:
We recommend that you
spread a thin film of oil or other
coolant along the line of cut ahead
of the saw. This will allow easier
operation and help extend blade
life. When cutting aluminum, use
kerosene.
