Before starting the equipment
•
The equipment must be set up where it
can stand securely. Secure the machine
on a workbench or a stand with 4 screws
through the holes in the fixed saw table
(15).
•
All covers and safety devices have to be
properly fitted before the equipment is
switched on.
•
It must be possible for the blade to run
freely.
•
When working with wood that has been
processed before, watch out for foreign
bodies such as nails or screws, etc.
•
Before you press the ON/OFF switch check
that the saw blade is fitted correctly. Moving
parts must run smoothly.
•
Before you connect the equipment to the
power supply make sure the data on the
rating plate are dentical to the mains data.
Do not use the tool if the switch does
not allow you to switch from the ON
state to the OFF state.
16
JCB-MS-210SB
Instruction & User Manual
