jcb JCB-MS-210C, Инструкции и руководство пользователя

Страница: 22 / 29

22
JCB-MS-210C
Instruction & User Manual
Mitre cut 0°- 45° and turntable 0°- 45°
(Fig. 1, 2, 1.3)
The crosscut saw can be used to make mitre
cuts to the left of 0°- 45° in relation to the
work face and, at the same time, 0° - 45° to
the left or 0° - 45° to the right in relation to the
stop rail (double mitre cut).
Important. To make miter cuts (inclined saw
head), the adjustable extention block (16a) must
be fixed at the outer position.
•
Open the set screw (16b) for the
adjustable extention block (16a) and push the
adjustable extention block (16a) outwards.
•
The adjustable extention block (16a) must be
fixed far enough in front of the innermost
position that the distance between the
extention block (16a) and the saw blade (5)
amounts to a maximum of 8 mm.
•
Before making a cut, check that the extention
block (16a) and the saw blade (5) cannot
collide.
•
Secure the set screw (16b) again.
•
Move the machine head to its upper position.
•
Release the turn table (9) by loosening the
set screw (21).
•
Using the handle (2), set the turn table (9)
to the desired angle (refer also to point “Cross
cut 90° and turntable 0° - 45°” in this regard).
•
Re-tighten the set screw (21) in order to
secure the rotary table.
•
Undo the locking konb (17)
•
Use the handle (2) to tilt the machine head
to the left until it coincides with the required
angle value (in this connection see also
section “Mitre cut 0°- 45°”).
•
Re-tighten the locking konb (17).
•
Cut as described under section “Cross cut
90° and turntable 0°”.